Brand: GEFRAN
Type: Linear Displacement Sensor
Model: LTC-M-0450-S
- Ensures high reliability under all conditions
- Mechanical structure enables LTC to withstand severe vibrations
- No change in electrical signal output beyond the theoretical electrical stroke for easier installation
- Widely used in injection molding machines, vertical injection molding machines, and numerous other production equipment
Effective Electrical Stroke (C.E.U.): 50/75/100/130/150/175/200/225/275/300/350/375/400/450/500/600/650/750/900
Independent Linearity (within C.E.U. range): ±0.05%
Resolution: Unlimited
Repeatability: 0.01 mm
Electrical Connection: M12 4-pin connector
Displacement Speed: Standard ≤ 10 m/s
Protection Class: IP67
Service Life: 25×10⁶ m stroke or 100×10⁶ cycles (whichever is smaller within C.E.U. range)
Displacement Force: ≤ 25 N
Vibration: 5–2000 Hz, A max = 0.75 mm, max. = 20 g
Shock: 50 g, 11 ms
Acceleration: 200 m/s² max. (20 g)
Resistance Tolerance: ±20%
Recommended Wiper Current: < 0.1 μA
Maximum Wiper Current: 10 mA
Maximum Applied Voltage: 60 V
Electrical Insulation: 100 MΩ (500 V DC, 1 bar, 2 s)
Dielectric Strength: < 100 μA (500 V AC, 50 Hz, 2 s)
Power Dissipation at 40°C (0 W at 120°C): 3 W
Resistance Temperature Coefficient: Typical: –200…+200 ppm/°C
Practical Temperature Coefficient of Output Voltage: ≤ 5 ppm/°C (typical value)
Operating Temperature: –30…+100°C
Storage Temperature: –50…+120°C
Sensor Housing Material: Anodized aluminum, Nylon 66G25
Tie Rod Material: Stainless steel AISI 303
Mounting: Adjustable center-to-center brackets or M5 screws (ISO 4017-DIN 933)
