Product Name: AD-4402 Weighing Indicator

Large and easy to see blue Vacuum Fluorescent Display (VFD). 

●Uses a ten key pad and function buttons that are designed for ease of operation and understanding. 

●The main display has a 7-digit VFD with 18mm tall characters. 

●The subdisplay has 108, 5mm tall characters and shows the values and error comments. 

●Pre-programmed with multiple sequences and functions for filling machines, simple mixing machines and other applications. 

●Stores 100 data for raw materials and 100 data for recipe codes. 

●RS-485 Serial Interface standard feature allows you to link up to 32 units to the display and supports the Modbus function. 

●The Monitor Function shows each operating interface and provides a confirmation on the display. 

●The compact body meets DIN requirements, while minimizing the depth of the indicator to135mm. 

●With the proper optional interface, the AD-4402 is compatible with CC-Link, DeviceNet, PROFIBUS.

AD-4402 can be incorporated in various applications that integrate complex systems, thereby facilitating a wide variety of sequences, such as basic filling/discharge, recipe, mixing, compensation and preliminary sequences. ★Sequential weighing mode 

The sequential weighing mode directly outputs control signals such as supply, discharge, preliminary-fullmedium-dribble flow, recipe and mixing materials and nozzle control without PLC.

★Interactive messages 

Messages that assist current operations are shown on the display and allow anyone to operate the AD-4402 without an instruction manual. Just follow the interactive setting and operating procedures on the display. Sometimes mistakes happen. When they do, a message is displayed so you can recognize the situation and take corrective steps.

★Digital Span and Gravity Acceleration Compensation 

When you cannot use an actual calibration weight due to location, just input the load cell rated output voltage for zero point and full capacity calibration. After moving the calibrated weighing system, recalibrate it by inputting the local gravity acceleration value.

★Calibrated A/D board 

The A/D board is calibrated before shipment and guaranteed to 1/500 accuracy. You can quickly replace the A/D board if there is a malfunction.

★Safety check function 

This function is used to stop the sequence when an error or an emergency occurs. When the safety function is used, an error code is displayed and an error signal is output automatically to the PLC to stop the system. Up to eight emergency overrides can be installed.

★11 Control Inputs/11 Control Outputs 

50+ functions (such as Full Flow, Over, Under, Discharge Bin, Net Display, etc.) for each of the 11 Control Inputs and 11 Control Outputs, depending on the weighing system.

★Standard RS-485 

32 indicators can be hooked up to the PLC (programmable logic controller), a PC (personal computer) or other equipment that supports Modbus. This is useful for control commands input and recalling/updating the code memory.